Bluetooth aptX Power Amplifier 80Wx2 Stereo HiFi 2.1 Digital Sound Amplificador 24Bit/192kHz Class D Amp w/ Bridge Mode
Connect with the XMP-100BT amplifier and enjoy the convenience of Bluetooth, auto-on, and auto-source switching technology that makes playing your favorite music a breeze.
Use this affordable, versatile amp when more power is needed in a multi-zone system, or in a powerful, audiophile-grade stereo hi-fi setup.
The XMP-100 BT high fidelity power amplifier switches sources and powers on (in auto-on mode) automatically when a source signal is detected. Bluetooth 5.0 with aptX, two line input sources, two-channels, and Class D topology make XMP-100 BT amplifier the heavyweight in its class. The HiFi Bluetooth Amplifier features two pairs of RCA line level inputs and a loop-out from the second source to feed additional zones, receivers, or other devices. Use the HIFI Power Amplifier for additional power when connected to a multi-zone audio system, or by itself to power a stereo speaker system.
The Bluetooth Amplifier is rated at 80 watts RMS per channel into 4 ohms, and 60 watts RMS per channel into 8 ohms. In bridged mono mode, both amplifier channels are combined for high-power monaural output. The amplifier is rated at 160 watts RMS into a single 8 ohm load when bridged. Each amplifier output channel incorporates robust protection circuitry for reliability and safety. Rack ears are included.
Features of the HiFi Bluetooth audio amplifier
* Bluetooth 5.0 Amplifier with aptX technology for wireless Hi-Fi listening
* Dual stereo RCA line level inputs switch sources automatically
* Convenient signal sensing power on and trigger modes save power when not in use
* A/B speaker selector simplifies connectivity
* 5-way binding posts on both sets of L/R speaker outputs
* This Bluetooth HIFI amplifier with Front panel balance and volume controls
* Rear panel treble and bass controls
* Signal sensing power on and trigger mode
* Audio siganl pass to another amplifier via RCA
* The Bluetooth power amplifier with Bridge mode
* Short circuit and thermal protection
Specification of the A/B switch Bluetooth HIFI Amplifier:
| Product name | XMP-100BT Bluetooth stereo HIFI amplifier |
| Output power | 2X80W per channel at 4ohm 2x60W per channel at 8ohm 1x160W at 1KHz 8ohm, bridge mode |
| Channel separation | 44 dB |
| THD | < 0.05% (@ 1kHz) |
| S/N Ratio | > 88dB |
| output noise | < 1mv |
| Input sensitivity | 700 mv |
| Frequency response | 20-20K Hz |
| Bass/Treble control | +/- 12dB at 100 Hz and 10K Hz |
| Class type | Home use Class D amplifier |
| Product working voltage | AC 110-240V/50Hz |
| Number of channels | 4 channels, speaker A/B selectable |
| Input methods | Bluetooth, RCA |
| Finish color | Black |
| Panel material | Aluminum |
| Net weight | 2.2 KGs |
Mode Select Switch STEREO MODE
If you connect one or two pairs of speakers to the amplifier, pleace the switch in the "STEREO" position.
Note: For playing 2 pairs of speakers (A plus B), make sure each speaker has an impedance of 8ohm or greater.
BRIDGE MODE
When set to "Bridge" mode, the amplifier is a signal channel mono amplifier.
For bridge mode, playing right and left together as mono output, plug RCA cables in to Right and Left at main input.
Pictures of the Bluetooth audio amplifier:
Product Tags:
|
|
Bluetooth aptX Audio Power Amplifier Class D HiFi 2.1 Digital Sound Amplificador 24Bit / 192kHz Images
|
